Justec jgs800i Operation & User’s Manual

1, 8 Port Gigabit Switch User’s Manual FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provi…

2, 1 Unpacking Information Thank you for purchasing the Gigabit Ethernet Switch. Before installation, please check that your package contains the following items. 1. One Gigabit Ethernet Switch 2. One power cord 3. Rack-mount brackets (optional) 4. User’s Manual Intr…

3, 2 z Supports 8K MAC address entries in whole system z 180K Bytes buffer memory z Support up to 9K bytes jumbo Frames z Supports extensive LED indicators for network diagnostics z Rack mountable z Internal power supply z 100~240VAC/50~60Hz universal input z FCC Class A, CE The Front Panel…

4, Justec jgs800i 3 The Rear Panel The rear panel of the switch is shown as below Power Receptacle To be compatible with the electric service standards around the world, the switch is designed to afford the power supply in the range from100 to 240VAC, 50/60Hz. Please make sure that your ou…

5, 4 brackets and screws for rack mounting the unit. Procedures to Rack-Mounting the Switch in the rack: 1. Disconnect all the cables from the switch before continuing. 2. Place the unit the right way up on a hard, flat surface with the front facing you. 3. Locate a mounting brack…

6, 5 Product Specifications Standard IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3x flow control Interface 8 * 10/100/1000Mbps auto MDI/MDI-X RJ-45 ports Network Data Rate 10/100/1000Mbps Auto-negotiation Transmission Mode 10/100Mbps Full-duplex, Half-…