Kasda KW5212 Operation & User’s Manual

42, WLAN VDSL Router User Manual 39 what you collected from your service provider, Re-configure ADSL router and reboot it. If you still cannot work it out, you may need to verify these variables with the service provider. If the cause is not given above, please contact your local service …

35, Kasda KW5212 WLAN VDSL Router User Manual 32 Network name (SSID) Enter a name for user’s wireless network here. SSID stands for Service Set Identifier. This name must be between 1 and 32 characters long. All wireless clients must either detect the gateway or be configured with t…

16, WLAN VDSL Router User Manual 13 Enable Full Cone NAT: In full cone NAT, all requests from the same private IP address and port are mapped to the same public source IP address and port. Someone on the Internet only needs to know the mapping scheme in order to send packets to a device beh…

20, WLAN VDSL Router User Manual 17 PPPoE service name can be blank unless your Internet Service Provider gives you a value to enter. Authentication method is default to Auto. It is recommended that you leave the Authentication method in Auto, however, you may select PAP or CHAP if neces…

34, WLAN VDSL Router User Manual 31 5.3 Wireless setting 5.3.1 Basic Option Description Enable wireless A checkbox that enables or disables the wireless LAN interfaces. The default is to enable wireless communications. Hide Access Point Select Hide Access Point to pro…

7, WLAN VDSL Router User Manual 4 1.3 System Requirements Before using this ROUTER, verify that you meet the following requirements:  Subscription for ADSL service. Your ADSL service provider should provide you with at least one valid IP address (static assignment or dynamic…