Advantek Networks AWN-11N-PCI Operation & User’s Manual

51, 51 Step 2: In Sharing tab, enable Internet Connection Sharing for this connection and click “OK” Step 3: Back to Network and Dial-up Connection screen, right-click “Local Area Connection 2” (for 802.11n Wireless LAN card) and choose “Properties”. …

82, 82 3.2.8 How to Manage Windows Profile Windows profile manager can be reached via connection icon on the task bar or control panel. [via Network icon] Step 1: Right-click connection icon on the task bar, then click “Network and Sharing Center” Step 2:…

69, 69 Step 4 –After the profile is saved, click the “Activate” button on Profile Page to active the profile.  Example 4:WPA/WPA2 Step 1 – Choose “WPA” or “WPA2” authentication type Step 2 – Choose “TKIP” or “AES” encryption type …

81, Advantek Networks AWN-11N-PCI 81 Step 2: Click “Tear Down” button. The result will look like the below figure. 3.2.7 About In the “About”, you can click the hyperlink to connect the website for the information of the wireless chipset vendor and review basic information about the …

58, 58 3.2.1.1 Add a profile By either pushing the “Add” button on Profile Page or the “Add to Profile” button on Site Survey Page, it brings up the profile setting sheet which contains two setting pages -- “Configuration” page and “Auth…

44, 44 Step 1: In “DLS Status”, select a direct link STA what you want to show its values in “Direct Link Setup”. Step 2: Double-Click and the result will look like the below figure. (3) Disconnect Direct Link Setup as follow: Step 1: Sele…