Advantek Networks ANS-24RV Operation & User’s Manual

10, 10 2.3 The SmartSwitch Home overview The window below shows the Home page of SmartSwitch: Administrator Æ1) Authentication Configuration 2) System IP configuration …

2, 2 FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a …

12, Advantek Networks ANS-24RV 12 2.4.2 System IP Configuration In this page, you can set and update the IP Address, Subnet Mask, and Gateway setting. After filling up the data that you want to change, click “Update” to process the data changed immediately. 2.4.3 System Status Click …

11, 11 3) System status 4) Load Default Setting 5) Firmware update Port Management Æ1) Port Configuration 2) Port Mirroring 3) Bandwidth Control 4) Broadcast Storm Control VLAN Setting Æ1) Group VLAN Setting 2) Multi…

21, 21 2.8 QoS Setting In some ports that need to have a high priority to manage the data transfer, QoS should be changed. Set the port’s QoS to high to determine the port will always transfer their data first. 2.8.1 Priority Mode Before users do the priority set…

28, 28 In the 1 st option to 3 rd option (1. Restore switch default setting/2. Restore IP default Setting/3. Restore Login default Setting), just simply press number to restore the default settings. Press”4’ to enter Modify IP setting screen: …