Skycat X68 Operation & User’s Manual

7, STEP 2 ARMING THE X68 LAUNCHER - First, please watch this arming demonstration video: www.tinyurl.com/skycat-x68-arming - The spring is very strong! Be careful and hold the launcher firmly when arming. - We recommend facial cover for safety. 1) Insert a Fuse through the center hole in…

2, How does Skycat parachute launcher work The parachute is packed and slided into the launcher tube. A spring loaded piston is used to push the parachute away from the aircraft. The loaded spring is held in tension by a special Fuse. To eject the parachute, electric current is conducted t…

16, STEP 7 FAIL-SAFE SETUP Decide what you want to happen if transmitter signal is lost: - If you want the parachute to eject, follow the same guidelines as in STEP 6. - If you want to activate RTH (return to home) or some other failsafe function of your flight controller, follow the ins…

20, All testing is conducted at your own risk. Skycat is not liable for any damages. For more detailed information please read the disclaimer below. DISCLAIMER Skycat is a backup system designed to decrease the kinetic impact energy of your multicopter, UAV or other ra…

8, 5) Use a hook to pull the Fuse through the base center hole. 6) Push bottom pin through the Fuse loop. Make sure that the pin is pushed all the way into the base, so that the Fuse cannot slip out! 7) Press down on the piston slightly and pull out the screwdriver. Slowly release…