Tieline Merlin Operation & User’s Manual

140, 140 Merlin User Manual v1.5 © Tieline Pty. Ltd. 2015 Important Note: When Tieline Codecs is the Session Protocol selected (using Tieline session data), the Return Audio Port is automatically configured as UDP audio port 9010 by default for the second audio stream. Click to configu…

197, 197 © Tieline Pty. Ltd. 2015 Merlin User Manual v1.5 It is possible to save up to four different ISDN Answer Configs, which allow up to 4 ISDN B channels to be individually configured for unique answering behaviors. ISDN answering can be configured to suit: · H…

42, 42 Merlin User Manual v1.5 © Tieline Pty. Ltd. 2015 How to Configure POTS G5 Codec Connections To configure the codec to dial using POTS for the first time: 1. Ensure that the correct country setting is configured in your codec via Settings > System > Country. This ensures the correct …

116, Tieline Merlin 116 Merlin User Manual v1.5 © Tieline Pty. Ltd. 2015 Next, enter the phone number of the codec or device you want to dial. When multiple POTS modules are installed, click the Via drop-down menu and select Module 1 or Module 2 to specify which POTS module will dial. Nex…

109, 109 © Tieline Pty. Ltd. 2015 Merlin User Manual v1.5 Ganging Channels: Ganging is useful because it allows you to adjust the audio level of both inputs simultaneously. 1. Click the Input Settings symbol on either channel. 2. Select Gang and click to either gang or ungang channels. 3…

267, 267 © Tieline Pty. Ltd. 2015 Merlin User Manual v1.5 Ping the Codec A ping test can be used to test whether it is possible to reach a codec or any device over an IP network. A ping test measures: · The round-trip time of packets. · Any packet loss. There are two types of ping tests: 1. Sho…