Ted Brewer Vivo 2 Owner's Manual

2, CONTENTS 1. Fitting the Battery 2. Connecting the Violin 3. Turning the Violin on 4. Turning the Violin off 5. Adjusting the volume 6. Adjusting the Tone 7. Tuning the Violin 8. Using Sound to Light function 9. Low Battery indicator 10. Care of your Instrument 1. Fitting the Battery Your Vivo2 V…

3, Ted Brewer Vivo 2 Initially after installing the battery for the first time, both banks of lights may illuminate fully, touch the volume down button until the bank reduces and do the same with the tone button. PLEASE NOTE WE RECOMMEND THE USE OF ALKALINE BATTERIES. 2. Connecting the Vivo2 The Vivo2 …

4, If the Vivo2 is to be stored or not used for a long period of time – it is recommended to remove the battery from the instrument. 5. Adjusting the Volume The two forward touch buttons are the volume controls. Touch the top button to increase volume. Touch the bottom button to decrease volume. …

5, 6. Adjusting the Tone The two rear buttons control the tone. Touch the top button to increase the tone. Touch the bottom button to decrease the tone. LED lights will illumate to show the desired level and the processor will retain these settings even with the battery disconnected. Tuning the Viv…

6, During this tone the two top LEDs will illuminate. Using the Sound to Light function The Vivo2 has two verticle banks of bright white LEDs. These are able to be switched to flash in time to the intesity of your playing. To activate or deactive the Sound to Light facility, with the vio…