Ducati MULTISTRADA 1200 ENDURO Owner's Manual

248, Setting the minutes Select "MINUTE" option, by pressing button (1) or (2). Once function is highlighted, press CONFIRM MENU button (4). The minute value starts flashing. Press button (1) to decrease minute value by 1: 59, 58, .... 00, 59. Press button (2) to increase minut…

336, Removing the pannier from the subframe Keep the pannier by the handle (3), insert the key in the lock (4) of the pannier engagement system and rotate it clockwise. Lift the pannier engagement lever (5) to open the locking mechanism. 3 4 Fig 232 5 Fig 233 334 …

91, DTC The instrument panel displays DTC status as follows: - if DTC is active, DTC indication and intervention level number (1 to 8); - if DTC is active, but system is in degraded operation due to a fault, DTC lettering and the DTC intervention level number, 1 to 8 (flashing); also the DT…

303, Entering the code: 1) Press button (4), one digit is highlighted indicating "0"; 2) each time you press the button (2) the displayed number increases by one (+ 1) up to "9" and then starts back from "0"; 3) each time you press the button (1) the displayed numbe…

256, Setting the unit of measurement: Fuel consumption This function allows you to change the units of measurement of the fuel consumption. You open the "UNITS SETTING" menu, as described in the previous pages. Select "CONSUMPTION" option, by pressing button (1) or (2). Once f…