The Singing Machine SDL366 Instruction Manual

29, The Singing Machine SDL366 — 28 — Updating the Firmware Specifications Make sure the Singing Machine USB Flash Drive, is securely plugged into the USB slot before running the update. DO NOT interrupt the update. If interrupted during the update process; the software can become corrupted and the uni…

26, — 25 — Operation Using the LINE IN Jack 1 Connect the unit as described previously. Press the ON/OFF button to turn the unit on. 2 Connect the external unit to the LINE IN Jack on the rear of this unit. Connecting an external unit will allow the audio to be played through your Singing…

1, SDL366 INSTRUCTION MANUAL www.singingmachine.com The Singing Machine® is a registered trademark of The Singing Machine Co., Inc. …

19, — 18 — Operation Playing Songs from the USB (Continued) 17 USING THE PLAYLIST: To play your previously created playlist, select Playlist using the Navigation  Right and  Left buttons, then press the ENTER button; the row under Playlist will be highlighted. Select the …

27, — 26 — Operation Using the LINE IN Jack (Continued) 6 Adjust the MIC VOLUME control as desired. Increasing this control will increase the volume of connected microphone(s). 7 Press ECHO +/- buttons to add an echo effect to your voice. The higher the number, the more echo effect. 8 R…

8, — 7 — Connection Connecting to AC Power Changing the Microphone’s Battery 1 Insert the AC power cord into a conveniently located AC outlet having 120V AC, 60Hz . Note: Make all connections before connecting to AC power. When performance suffers, change the batteries as follows: 1 …