Spypoint IRON-9 Operation & User’s Manual

19, 19 Photo recording Photo resolution 3 MP, 10 MP File format JPG Time lapse mode Predened intervals from 1 min to 15 min Multi-shot mode Up to 4 photos per detection Stamp (only on photos) Date, time, temperature (°C/°F) and moon phase Capture mode Color by day, black and wh…

6, 6 1 Photo lens Image sensor and infrared lter. 2 Invisible LEDs Night lighting to obtain black and white photos and videos. 3 Test light Flashes in TEST mode when there is detec- tion and ashes 60 seconds in PHOTO/VIDEO mode to allow the user to leave without being photograph…

7, 7 The battery level is shown on the LCD screen. When a single line remains, the camera will continue to take photos but we strongly recommend to change the AA batteries or charge the lithium battery pack before they are empty (see gure below). If a video is being recorded and the battery …

18, Spypoint IRON-9 18 Photo recording Photo resolution 3 MP, 9 MP File format JPG Multi-shot mode Up to 4 photos per detection Stamp (only on photos) Date, time, and temperature (°C/°F) Capture mode Color by day, black and white by night Video recording Video resolution 320 x 240 or 640 x 480 File…

15, 15 TROUBLESHOOTING Problem Possible solutions Impossible to turn on the camera • Verify if there are batteries in the camera. • Verify if the batteries are correctly installed. • Install the latest update (available on www.spypoint.com under SUPPORT section). • Replace alkaline batte…

9, 9 To congure the general settings, set the camera to SET/TEST mode. Press OK to enter the menu. The ashing option is the one that can be modied using UP/ DOWN. Press OK to conrm and to set the next option. Once you went through all the options, turn the camera OFF to record the se…