Topp Music Gear MX.5 V2 Operation & User’s Manual

10, CONTROL ELEMENTS 10 5 26- AUX SEND OUT 27- PHONES OUTPUT These 1/4" TRS are used to send out the signal from the AUX bus to external device such as effects equipment. Each channel has an AUX SEND control knob that adjusts how much of that channel's signal appear at each o…

8, Topp Music Gear MX.5 V2 CONTROL ELEMENTS 12- LEVEL This control will adjust the overall level of this channel. If you set the LEVEL control in max, it's usually a sign that your GAIN is set too low. If set the LEVEL control in min, your GAIN may be too high. 13- CD/TAPE INPUTS These RCA jacks will a…

17, TECHNICAL SPECIFICATION Input HPF -7 dBu @75 Hz Frequency Response Model Number MX.5 V2 MX.6/USB V2 MX.10/USB V2 MX.12/USB V2 MX SERIES MIXER Mic Input to any Output(Gain @ 0dB, Rated output level) 20Hz -75kHz (0, -1dB) Distortion (THD&N) Mic Input to MAIN Output ( ) Gain@ 0 dB, Rated output l…

6, TONTROL ELEMENTS 1- Mono MIC Input 2- LINE INPUTS 3- GAIN CONTROL EQUALIZATION The MX series has 3-band EQ on all mono channels(except MX.5 V2 has 2-band EQ). And only MX.6/USB V2 has EQ controls on stereochannels.Allbandsprovideupto15dBboostorcut. The MX series is equipped with one or more low…

15, BLOCK DIAGRAM MX.10/USB V2 TAPE OUT R TAPE OUT L TAPE IN R TAPE IN L Built-in USB V2/Audio interface This section only for MX.10 USB V2 TAPE OUT R TAPE OUT L TAPE IN R TAPE IN L 15 8 …