Traeger BBQ150.01 Owner's Manual

4, SECTION ONE: ASSEMBLY INSTRUCTIONS Steps 1 through 7 below do not apply if you intend to use your Grill in a built-in application. MOUNTING THE LEG FRAME ASSEMBLIES AND CASTERS The assembly process will require two people to complete. 1) With your helper, carefully lay the Grill on …

13, WARNING! If the fire in the Firepot goes out while smoking, when sufficient Pellets are still in the Pellet Hopper, it is important to follow these steps. Failure to do so may cause a hazardous “over-firing” of your grill due to an excess of unburned pellets in the Firepot. You …

22, BBQ150.01 BURNER COMPONENTS PAGE 2 OF 2 …

17, the Grill with a small metal fireplace shovel or other similar tool. Dispose of the ashes per the following instructions. WARNING! A vacuum cleaner is the best way to remove ashes from the Firepot but this must be done with extreme care to avoid the risk of fire. Again, cleaning the ash…

23, BBQ150.01 PARTS LIST (FROM PAGE 1 AND 2) Item Qty Description P/N Item Qty Description P/N 1 2 Burner Box Assembly SUB104 56 1 Hopper Burner Assembly right SUB218 2 2 Auger Drive Motor BRN100 58 1 Hopper Burner Assembly Left SUB2…

7, Traeger BBQ150.01 BBQ150.01 BUILT-IN SPECIFICATIONS GRILL ENCLOSURE MUST BE OF NON-COMBUSTIBLE MATERIALS. (12” MINIMUM CLEARENCE FROM GRILL TO COMBUSTIBLE MATERIALS) …