System Q IP-CAM705 Operation & User’s Manual

13, 13 4. WAN Access IP cameras have their own network capability and can be connected direct through a network for viewing only. In most circumstances however they would be connected through a DVR and do not have to be setup in the modem/router. If they are used independently then each IP …

2, 2 Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury may be caused if warnings are neglected. Cautions: Inju…

3, 3 Cautions 1. Make sure the power supply voltage is correct before using the camera. 2. Do not drop the camera or subject it to physical shock. 3. Do not touch the CMOS sensor with your fingers. If cleaning is necessary, use clean dry cloth. If the camera is not used for an extended period, pleas…

9, 9 3. Parameter Configuration There are several network parameters that need setting after the hardware installation. These parameters include IP address, subnet mask and port number, etc., which can be set by various means and two of them are detailed below. 1. Set the camera parameters suc…

5, System Q IP-CAM705 5 1. Introduction This network camera is a type of embedded digital surveillance product that combines the features of both traditional analogue camera and net DVS (Digital Video Server). Due to the embedded Linux operation system and the latest TI Davinci hardware platform the system …