UDP Technology IPN1202HD Installation Manual

10, IPN Series IPN1202HD-5241 Installation Guide 01A.03 UDP Technology Ltd. 10 Power Connection The camera can be powered from either 12VDC or PoE. If the camera is powered via PoE, refer to Appendix (B). Power over Ethernet for more details. To operate your camera using 12VDC, make su…

14, UDP Technology IPN1202HD IPN Series IPN1202HD-5241 Installation Guide 01A.03 UDP Technology Ltd. 14 To modify the device’s default IP address for customized network area; 1. Find the device from the IPAdminTool’s list and highlight the device’s name. 2. Right-click the mouse and selec…

7, IPN Series IPN1202HD-5241 Installation Guide 01A.03 UDP Technology Ltd. 7 ① Power Adaptor Connect The camera requires DC 12V for power supply. Refer to the section “4.3. Connecting Cables” for more specific information ② PAL/NTSC button Press the PAL/NTSC button to set vi…

12, IPN Series IPN1202HD-5241 Installation Guide 01A.03 UDP Technology Ltd. 12 Caution ! Do not exceed the maximum relay rating. RS-485 Connection The RS-485 serial port consists of TRX+(RX+) and TRX-(RX-) as following. 4.4. Setting the Image Attribute Through the camera�…

22, IPN Series IPN1202HD-5241 Installation Guide 01A.03 UDP Technology Ltd. 22 APPENDIX (D): HEXADECIMAL-DECIMAL CONVERSION TABLE Refer to the following table when converting the MAC address of the device to the IP address. Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec …