adt-audio SRC 51 Installation Manual

1, Installation Manual Part III: Console Frame Installation of the console Operating conditions Maintainance Thermal Considerations analoge + digitale Tonstudiotechnik Karl Jüngling • Inh. Dipl.-Ing. Gerd Jüngling 4-6 Scholtwiese • Gladbeck • 45966 • NRW • Germany • Phone: 0049 2043…

5, 5 adt-audio 51 SRC Input Modules The frame slots that are used for input modules are compatible with all types of input modules. However, stereo modules and surround modules use the connectors and the patch bay jacks differently. Please read the description of the particular m…

9, 9 adt-audio 51 SRC must be connected to the crossover device. After you have installed all connections, double check for any transport damage. Check if all the modules are properly installed in the frame. If you are sure that everything is okay, switch the system on and check if all contr…

4, 4 adt-audio 51 SRC 1. Frames General Information SRC51 console frames are available in many different versions. Almost any frame size with an even number of module slots is possible. The maximum, overall width of a single frame is 3900 mm. Such a frame has 96 module slots. Seve…

6, 6 adt-audio 51 SRC Variantes All frames are basically oorstand versions. The oorstands are part of the scope of supply. They are xed to ange plates on the left and right side of the frame. Desktop versions or build-in version are possible for small frames up to…

8, adt-audio SRC 51 8 adt-audio 51 SRC console frame. You will nd the necessary screws in the accessorie box. The armrest has been prepared for mounting at the factory. It’s xed by screws thru holes in the frame. Please check for the pre drilled holes in the armrest, put it in place and x th…