Aegis AEG-WR Installation Manual

1, Model AEG-WR Wireless Receiver Installation Manual Downloaded from - http://www.guardianalarms.net …

8, 8 The next four items allow you to change each digit of your security code. The Set switch is used to increment the value of each digit. The Mode/Advance switch is used to enter each digit and advance to the next. Next, the programmed characteristic…

11, FCC NOTICE This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operatio…

3, 3 DESCRIPTION The Model AEG-WR Supervised Wireless Receiver allows up to 64 unique wireless security transmitters to report information to an Aegis automation controller. The wireless transmitters replace wired door and window sensors, as well as w…

6, 6 (not ready) or that have trouble. The transmitter number flashes on the display followed by the status condition(s). LED DISPLAY INFORMATION ABOUT THE LED DISPLAY 1.10 Displays the number of the transmitter with a change in condition. A L Displays …

12, Aegis AEG-WR QUICK-REFERENCE SETUP GUIDE To Enter Set Up mode, press and hold the Mode/Advance switch for 2 seconds. DISPLAY DESCRIPTION SET SWITCH MODE/ADVANCE SWITCH C 0 Enter the first digit of the code Increments the digit (0-9) Advances to the next digit C 0. Enter the s…