AEI DK-9520 Programming & Installation Manual

1, + - 12 24V 12 APPLICATION EXAMPLE BASIC WIRINGS OF A STAND ALONE DOOR LOCK NOTE: Connect the 1N4004 as close as possible to the lock in parallel with the lock power terminals to absorb the back EMF to prevent it from damaging the keypad. The 1N4004 is not required if the electric loc…

2, AEI DK-9520 INTRODUCTION DK-9520 is an universal, self-contained digital access keypad offers field proven reliability and cost effective solutions for residential and commercial installations. It is designed for stand alone electric lock that operates from a 12 to 24V AC/DC power supply and virtually compa…

3, 2) Programming NOTE: 3) Operate The Keypad a) b) c) d) Example: -- Set the above requirement into the keypad a) **Enter the Multi User Mode Command Code " may not be necessary if the keypad was already in Multi User Mode. b) In case of wrong entry during programming, cancel it with…

4, PROGRAMMING OPTIONS -- SUMMARY CHART A) Use The Factory-set Master Code to Entry in Programming B) Set System to Single User or Multi User Mode & Refresh The System D) Configuration of Output Modes -- -- -- When starts for the first time Set system into Programming Mode with the Factory-…

5, PROGRAMMING AND USE OF THE KEYPAD -- OPERATION EXAMPLES a) b) NOTE: c) d) All programming is accomplished entirely from the front of the keypad. The keypad may be programmed in your shop or at the installation site. Programmed information is stored in non-volatile memory so it will …

6, 6 SINGLE USER MODE OR MULTI-USER MODE SELECTION The keypad consists two sets of software for owner's selection in user code programming. They are "Single User Mode" and "Multi-User Mode". The keypad has been set with a Master Code of "0000" and in Sin…