AUSTRALIAN MONITOR AMPAV30 Installation And Operation Manual

7, SPECIFICATIONS AMPAV30 Speaker system 3-Way Active Speaker 3-Way Passive Speaker Power (Continuous) 2 x 15 Watts Impedance 4 Ohms Sensitivity (1 W / 1 M) 88 dB Calculated max SPL (per speaker) 100 dB Frequency Response (-3 dB) 45 Hz – 20 kHz Frequency Response (-10 dB) 40 Hz – 22 kHz Speak…

4, 1 5.25” Bass Driver 2 0.5” Dynamic Tweeter 3 1.0” Piezo Tweeter 4 Bass Port PAGE 4 AMPAV30 INSTALLATION AND OPERATION MANUAL AMPAV30 FRONT PANEL – ACTIVE AND PASSIVE GRILL REMOVED 1 4 2 3 …

3, AUSTRALIAN MONITOR AMPAV30 AMPAV30 The Australian Monitor AMPAV30 is an active three-way stereo speaker system consisting of one powered and one passive speaker. The speakers are compact, architecturally pleasing and come supplied with adjustable mounting brackets. Features include an on-board 15 W stereo ampli�…

2, IMPORTANT SAFETY INFORMATION PRÉCAUTIONS DURANT UTILISATION 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. I…

6, PAGE 6 AMPAV30 INSTALLATION AND OPERATION MANUAL MOUNTING MOUNTING When mounting AMPAV speakers the following safety issues must be considered. The mounting of a permanently installed speaker may be dangerous unless undertaken by a qualified professional with relevant experience. …