AG Neovo X-17P Operation & User’s Manual

16, 16 MAKING CONNECTIONS S-VIDEO or Using S-Video Cables Connect one end of an S-Video cable to the S-VIDEO connector of the LCD display and the other end to the S-VIDEO connector of your device. For audio input, connect an RCA cable to the audio in connector of the LCD display and …

39, AG Neovo X-17P 39 ADJUSTING THE LCD DISPLAY 5.10 Input Select DVI PRESS VGA PRESS CVBS PRESS S-VIDEO PRESS EXIT ENTER SELECT BRIGHTNESS COLOUR SETTING IMAGE SETTING PIP SETTING ANTI-BURN-IN OSD SETTING AUDIO SETTING OTHER SETTING AUTO BRIGHTNESS INPUT SELECT LANGUAGE INFORMATION 1280x1024 75Hz 1.…

7, 7 PRECAUTIONS Cautions When Using Use only the power cord supplied with the LCD display. The power outlet should be installed near the LCD display and be easily accessible. If an extension cord is used with the LCD display, ensure that the total current consumption plugged into the power outlet…

18, 18 USING THE LCD DISPLAY 3.3 Adjusting the Volume 1 Touch either the or buttons to call out the volume bar. 2 Touch the button to increase volume. Touch the button to decrease volume. To mute the audio, set the volume to 0. VOLUME buttons 3.4 Locking the OSD Menu Lock the OSD menu …

8, 8 PRECAUTIONS Notice for the LCD Display In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease with time. When static images are displayed fo…

40, CHAPTER 6: APPENDIX 40 6.1 Warning Messages Warning Messages Cause Solution INPUT SIGNAL OUT OF RANGE The resolution or the refresh rate of the graphics card of the computer is set too high. Change the resolution or the • refresh rate of the graphics card. NO SIGNAL The LCD dis…