AGFA SNAPSCAN E42 Operation & User’s Manual

3, Contents 3 Contents Preface ............................................................................................................................................... 5 About SnapScan ...........................................................................................…

35, Chapter 4: Installing the Scanner for Macintosh 35 Installing the Scanner Software 1 Insert the Agfa ScanWise CD-ROM in your CD-ROM drive. The Agfa ScanWise window appears. 2 Double-click the ScanWise Installer icon. # Note: If the ScanWise window does not appear automatically, carry …

47, Chapter 5: Configuring Buttons on Your Macintosh Computer 47 10 Click Close. You return to the Configure Buttons Window. 11 Select your new configuration from the drop-down list next to the e-mail button. 12 Click OK. The e-mail button is configured with your personal settings. …

6, AGFA SNAPSCAN E42 Preface 6 About SnapScan In this Owner’s Guide, the name SnapScan is used for both the SnapScan e42 and e52. The SnapScan is a one pass flatbed color scanner with a resolution of 1200 x 2400 ppi equipped with a cold cathode lamp. It is based on CCD (Charge-Coupled Device) scanning …

55, Appendix A: Troubleshooting 55 Appendix A: Troubleshooting This section gives solutions for some common problems you may come across when starting up or using your SnapScan. There is no USB port free for your scanner. " Check if you can use a USB port on the keyboard or monitor. &quo…

25, Chapter 3: Configuring Buttons on Your PC 25 Modifying an Existing Configuration It is possible to modify an existing configuration and assign it to one of the four buttons of your SnapScan. The following example will show you how this is done. In this example we will change the settings …