Fogtec SHZ-80 Operation & User’s Manual

6, The operator must always make sure that the safety-relating and machine-technical installations are approved by an expert before operation for the rst time and after any further changes are made. The operator has to make sure that the safety-relating and machine-technical installations are …

7, TC-1/TC-4 Controller The TC-1 is suitable for the VP-1500 and the TC-4 is suitable for the SHZ-80 The operation is as follows: 1, When the “MANUAL FOGGING” Green LED is OFF, this means that the fog/haze machine is heating up. When the Green LED illuminates, the fog/haze mac…

4, Fog machines: SHZ-80 VP-1500 VP-2500 VP-2500 Identi cation: A, Handle B, Fog  uid container C, Indicator lamp D, Remote socket E, IEC power socket F, Fuse G, Low  uid indicator (front) Identi cation: A, Bracket B, Fog  uid container C, Indicator lamp D, Remote so…

2, WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids. SAFETY INSTRUCTIONS Every person involved with the installation, operation & maintena…

8, DMX-2 controller appendix The DMX-2 is suitable for the VP-2500, the operations are as follows: 1, When the “MANUAL FOGGING” Green LED is OFF, this means that the fog/haze machine is heating up. When the Green LED illuminates, the fog/haze machine has heated up and is ready for use. 2…