FOLD & GO HEAVY-DUTY User And Care Manual

9, 9 When the LED light on the Joystick ickers, it means that there is something wrong with the wheelchair. An alarm may also sound from the rear motor wheels, brakes, batteries, wire connections, or from the wheelchair itself. Below are the diagnostic codes to help you identify any problem…

6, FOLD & GO HEAVY-DUTY 6 How to FOLD the FOLD & GO Electric Wheelchair How to UNFOLD the FOLD & GO Electric Wheelchair ● Turn o the Joystick then remove it and put it in the storage bag under the seat for safe keeping. ● Locate the black safety latch on the back of the wheelchair. ● Flip the bla…

5, INSTRUCTIONS 5 Batteries Already Installed Manual Mode - No Brakes The Heavy-Duty model comes with two lithium-ion batteries. We ship the batteries with your wheelchair. We have already placed each battery inside the frame of the chair. You do not need to remove the batteries for …

4, PARTS OF YOUR FOLD & GO WHEELCHAIR 4 Foot Plate Joystick Controller Rear Motor Wheel Seat Cushions Front Wheel Battery Storage Bag …

8, 8 Joystick Functions Movement Direction to Move Joystick FORWARD Move the joystick FORWARD BACKWARD Move the joystick BACKWARD RIGHT Move the joystick RIGHT LEFT Move the joystick LEFT STOP Release your hand from the joystick Increase Speed Horn Power ON/OFF 5-Speed Modes Decrease Spee…

7, Specications of the Heavy-Duty FOLD & GO Electric Wheelchair 7 Net Weight 55 LBS Weight Capacity 400 LBS Motor 180 Watt x2 Brushless Battery Lithium-Ion 24V/10AH Standard Max Speed 4 MPH Turning Radius 31.5 inches Grade/Slope 12 degrees Charging Time 5 Hours Seat Width 19 inche…