Epic EER20W Owner's Use And Care Manual

3, EER20W | EER24W | EER24BL • When removing appliance for cleaning and/or service: • Disconnect AC power supply. • Carefully remove the range by pulling backwards. CAUTION: Range is heavy, please use care in handling. • Do not abuse the oven door (e.g. standing, sitting…

10, Epic EER20W 1. Oven Function Selector Knob 2. Oven Thermostat Knob 3. Front Left Burner Control Knob 4. Rear Left Burner Control Knob 5. Rear Right Burner Control Knob 6. Front Right Burner Control Knob 7. Oven Power Indicator Light 8. Burners Power Indicator Light There are three functions – OVEN…

4, Assemble the Backguard as shown: the Backguard also is the oven heat vent and MUST be installed before using this appliance. 1) Remove the four (4) screws at the back of the range (B). 2) Align and screw the backguard to the holes at the back of the range using the four (4) screws…

15, EER20W | EER24W | EER24BL REMOVING THE OVEN DOOR To facilitate oven cleaning, it is possible to remove the door. Please follow the instructions carefully: The oven door can easily be removed as follows: - Open the door to the full extent (Fig. 1). - Engage the retaining clips to both hi…

12, OVEN THERMOSTAT This only sets the cooking temperature and does not switch the oven on. Rotate clockwise until the required temperature is reached (From WARM to 450°F). The power indicator light signals when the heat elements are switched “ON” or switched “OFF”. TEMPERATURE SETTING TABLE K…