epiphan Pearl Operation & User’s Manual

207, epiphan Pearl Pearl User Guide 6-1 View your video Your stream is advertised by the metadata title, if one was configured under Branding, otherwise it is identified by it's channel identifier. For a description of how to set the metadata, refer to Add your logo a…

32, Pearl User Guide Quick Start Step 6: Recording the Channel The channel is set up and streaming. This may be all you need, but if you like, you can also record the stream. You can choose to initiate and control channel recording from either the touch screen o…

153, Pearl User Guide 4-1 Stream your video 5. Enter the host name or IP address of the CDN or media server. 6. Enter the server's RTSP port number. Usually for RTSP streaming the value is 554. 7. Enter a value in the Mount Point field…

151, Pearl User Guide 4-1 Stream your video Stream content to a CDN provider Publish to any CDN provider that supports incoming streams sent via RTSPannounce or RTMP push. Both RTSP and RTMP can be used for live streaming, however not all CDNs or media…

62, Pearl User Guide 1-3 Configure Network Settings l Restore factory settings, clearing all your custom settings. See Restoring Factory Configuration. l Load a configuration file that uses DHCP networking. See Load a saved device configuration. l Chang…

212, Pearl User Guide 7-1 Mobile / Tablet Operator Interface 4. For audio inputs without signal, nothing appears in the audio input bars. 5. For audio inputs with signal, the level is shown next to the source name in the audio input bar. 6. …