ElectrIQ 702A7CAM Operation & User’s Manual

13, 13 of 17 5 Minutes itself off after the selected time period. Beep Sound Off On Turn on or off the beeps when keys are pressed. GPS Stamp ON OFF Select to include the GPS stamp on the video or not. Velocity Stamp ON OFF Select to include the speed stamp on t…

10, 10 of 17 Motion Detection Off Low Middle High The higher the setting the more sensitive the motion detection will be. Sensor Flip Off On Rotate the image display if the camera is to be used upside down. LDWS Off On Turn on or off the Lane Departure Warning sys…

6, 6 of 17 OPERATION Micro SD Card Installation Install the Micro SD card as shown below: GPS Module Installation (702A7GCAM only) Insert the GPS module into the camera holder as shown below: Install the device on the windscreen using the sticker or sucker. …

12, 12 of 17 Pressing the Menu button (6) again will bring up the Setup Menu. Navigate the menu by pressing the Up (11) & Down (13) buttons. Make a selection by pressing the OK (12) button. The following settings can be selected and changed: Item Options Remark P…

9, ElectrIQ 702A7CAM 9 of 17 Still Picture To capture a still picture, press the Camera Button (14). In video mode this will take a picture of the current view from the camera. In playback mode this will take a snapshot of the current frame on the video. MENU SETTINGS Pressing the Menu button (6) once will…

15, 15 of 17 Copy File To Another Card Yes No This allows you to copy selected file from one memory card to another. If you have selected to record to External card then files will be copied to the internal memory and vice versa. Format Yes No Format the memory card …