Feathercraft aironaut Manual 

11, Your dealer may also have a boat valve wrench. This ts onto the valve and is used to twist the top off. To Open and Remove Boat Valve The boat valve is a two section twist valve. The inner section can be felt through the kayak fabric. Feeling through the kayak skin, hold the inner par…

10, The fabric used to make the Aironaut is a robust urethane fabric and is very abrasion resistant. However, care must be taken when approaching and launching from sharp and jagged shores. Precaution: Using the sea sock at all times will greatly inhibit water from entering the boat. If water does…

7, Folding & Rolling the Kayak Skin a. Fold skin at edge of bow rim. (This rim section is not removed) Remove the skeg. Remove the Rim Inserts. Open the seat valves. Open the boat valves, pushing in the yellow poppit and turning clockwise. b. Flatten out skin along fold. c. Twist bow & s…

2, aironaut by Feathercraft Made in Canada. Paddled World Wide. The pump can both inflate and deflate. Green tape indicates inflation connection. …

5, Feathercraft aironaut Install Rim Inserts Slide the two white plastic inserts into pockets on the underside of the coaming. Inate Seat Bottom and Seat Back • Push the short black ller hose into the pump ll adaptor. • Open the twist valve by turning counter-clockwise. • Push the ller hose ov…