Digital Projection TITAN sx+ Pro Series 3 Installation And Quick Start Manual

50, Digital Projection Titan Pro Series 3 A TOUR OF THE MENUS Operating Guide Op 18 Rev D November 2012 Input Conguration This menu allows adjustment of various technical parameters specic to each of the signal inputs, regardless of which input is being used. • DVI Boost EQ shoul…

108, Digital Projection Titan Pro Series 3 INPUT CONNECTIONS Reference Guide Ref 41 Rev A November 2012 Input Connections Inputs 1-8, on the rear of the projector, are limited input frame rates up to 60Hz, but provide access to the full geometric adjustment capabilities, including …

106, Digital Projection Titan Pro Series 3 POSITIONING THE IMAGE Reference Guide Ref 39 Rev A November 2012 Positioning The Image (continued) Any single adjustment outside the ranges specied on the following page may result in an unacceptable level of distortion, particularly at…

88, Digital Projection TITAN sx+ Pro Series 3 Digital Projection Titan Pro Series 3 CHOOSING A LENS Reference Guide Ref 21 Rev A November 2012 Choosing A Lens A number of lenses are available. Which lens you choose will depend on the screen size, image aspect ratio, projection distance and light output. In addition, each len…

43, Digital Projection Titan Pro Series 3 A TOUR OF THE MENUS Operating Guide Op 11 Rev D November 2012 Size & Position • Set Enable to On or Off. • Use Setting to choose: Global, in which case these settings will be applied to all signals on all inputs. or Per Mode, in which…

72, Digital Projection Titan Pro Series 3 ASPECT RATIOS EXPLAINED Reference Guide Ref 5 Rev A November 2012 Aspect ratio examples for DMD™ resolution SX+ (SXGA+) (continued) Source: 16:9 1 Unused screen areas 2 Cropped parts of the image Notes Aspect Ratio: Fill & Crop Aspect R…