Danaher Motion Servostar M-SS-005-03 Operation & User’s Manual

36, BASIC Moves Development Studio 06/2005 Danaher Motion 26 Rev E M-SS-005-03l System.DecelerationRate Queries or sets the system deceleration exchange rate. System.DIn Returns the value of one or more of the 23 digital inputs. System.DIn returns the values of the individual bi…

46, BASIC Moves Development Studio 06/2005 Danaher Motion 36 Rev E M-SS-005-03l 2. 3 PROGRAM DECLARATIONS You must declare the start of programs and subroutines. For programs, use Program…End Program. Use Sub…End Sub keywords for subroutines. 2.3.1. Program The Program…End Program keywor…

136, Groups 06/2005 Danaher Motion 126 Rev E M-SS-005-03l 6.9.3. Motion Flags The last step in preparing a system for motion is to turn the motion flags ON. There are two motion flags: the system motion flag and the motion flags of each axis within the group. For example: System.Motio…

149, Danaher Motion 06/2005 Compensation Tables 7.1.4. Load/Save From a File Another way to create a compensation table is to directly load it from a binary file stored on the Flash disk. The structure of the compensation file is: Header – <number of axes> <number o…

38, Danaher Motion Servostar M-SS-005-03 BASIC Moves Development Studio 06/2005 Danaher Motion 28 Rev E M-SS-005-03l With…End With Simplifies blocks of code, which set a number of parameters on the same motion element (axis or group). After a With is encountered, all parameters where the element is not specified …

111, Danaher Motion 06/2005 Single-Axis Motion 4.2.3. Registration Registration applications are those that start motion and then modify the profile, based on a subsequent event. These applications generally involve discrete product processing, such as are common in the packaging, print…