Disty base duo plus Operating Instructions Manual

37, 72 Registering the handsets 2 Registering the handsets The handsets need to be registered on the distybase duo/duo plus/ duo exant before they can be used. Please note that no more than 8 handsets can be registered on the distybase duo/duo plus/duo exant. Proceed as follows to regi…

32, 2 Informationen Important information The distybase duo/duo plus/duo exant is used as a universal base station for operating handsets conforming to the DECT/GAP standard, and for the distybox 300/5000. A total of 8 handsets can be registered. The distybase duo/duo plus/duo exant can be …

11, 9 Bedienungsanleitung 3Programmierung 3.2.1 Rufzuordnung der Mobilteile Funktion Parameter- Ltg.-Nr. Mob.-Nr. kennzahl Rufzuordnung 11 1…2 0…9 # Je Leitung können ankommende Anrufe maximal 4 Rufzielen zugeordnet werden. Rufziele sind die Mobilteile 1 bis 8 und der Sammelruf 9. Bei den Rufzie…

45, 153Programming mode 3.2.11 CLIP Function Parameter Inputs code CLIP 24 0 # Number presentation (CLIP) is deactivated. CLIP 24 1 # Number presentation (CLIP) is activated. The number transferred is sent to the called handset as soon as it is present. This might not work with all …

8, 6 1 Montage 5. Verbinden Sie die distybase duo/duo plus/duo exant mit der Stromversorgung. 6. Verbinden Sie Ihre analogen Telefonanschlüsse mittels der beiliegenden Kabel mit der distybase duo/duo plus/duo exant. 7. Hängen Sie die distybase duo/duo plus/duo exant in die Schrauben ein.…

46, Disty base duo plus 16 3Programming mode 3.2.12 Changing the PIN Function Parameter Inputs code Changing the PIN 26 new PIN new PIN # Access to programming mode can be protected using the four-digit PIN. The PIN only needs to be entered if a new PIN has been set beforehand in programming mode. To ch…