DivioTec TBR722 Operation & User’s Manual

53, 48 SNMP Simple Network Management Protocol (SNMP) is a protocol that can be used to manage and monitor SNMP-enabled devices over a network. The SNMPv1, SNMPv2 and SNMPv3 settings for the IP camera can be congured in this page. SNMP v1/v2 Enable SNMP v1/v2 Enables or disables SNMPv1 and S…

26, 21 Stream 1 Enable 3MP output Enables the camera output in a 3MP output le. Resolution Congures the resolution of the video stream. The options are 1920x1080 (16:9), 1280x720 (16:9), 720x576 (5:4), 720x480 (3:2) 640x480 (4:3) and 320x240 (4:3). FrameRate Adjusts the frame ra…

15, 10 Next button 8. Click on the Next button to begin installation. Close button 9. Once the installation process is complete, click on the Close button to nish. A shortcut will be created on the desktop. …

57, 52 System Schedule Recording This section is used to schedule the recording of the video streams. Schedule Recording Setting Enable Schedule Recording Enables or disables recording of the video stream. Daily Congures the camera to record at the specied Start Time and End Tim…

27, DivioTec TBR722 22 Stream 2 Resolution Congures the resolution of the video stream. The available options are 1280x720(16:9), 720x576(5:4), 720x480 (3:2), 640x480(4:3) and 320x240(4:3). FrameRate Adjusts the frame rate of the video stream. Setting 0 will disable the stream. Bit Rate Control Congures the Bit…

19, 14 Conguring the Camera’s Setting 1. To congure the camera’s setting, click on the Setup button on the main screen to enter the conguration menu. Setup …