Adam Equipment MDW – 250L Operation & User’s Manual

7, © Adam Equipment Company 2009 Page 6 Rev C3, June 2008 4.0 SETTING UP THE SCALE • Take the Physician scale out of the box. • Unwind the load cell cable (number 2 on the diagram). • Run the cable up through the pill…

9, Adam Equipment MDW – 250L © Adam Equipment Company 2009 Page 8 Rev C3, June 2008 5.2 MEASURING HEIGHT • While measuring the height, it is necessary to pull up the measuring board at a right angle with the inside tube. • When the tube is pulled out stra…

19, © Adam Equipment Company 2009 Page 18 Rev C3, June 2008 Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonised European standards, following the provisions of the below stated directi…

15, © Adam Equipment Company 2009 Page 14 Rev C3, June 2008 Table1: The status bits definition: Bit Byte 1 (H 1 ) Byte 2 (H 2 ) Byte 3 (H 3 ) 0=stable 0= not under capacity 0 1= not stable 1= under capacity 0= not at zero point 0= not over cap…

13, © Adam Equipment Company 2009 Page 12 Rev C3, June 2008 8.3 When Parameter S.F. in section 7 is set to 1 : Continuous output of the current displayed reading and unit, and it does not receive any data. The output format is as below: <LF><…