Allied Telesis AT-2450 Series Installation Manual

27, Allied Telesis AT-2450 Series Network Adapter Card Installation Guide - Book II 27 8. From the Main Menu of the diagnostics program, select one of the following: ❑ DIAGNOSTICS for the simple test (no loopback) ❑ LOOPB. WRAP PLUG for the loopback test The various components will now be tested. This will take between one and…

31, Network Adapter Card Installation Guide - Book II 31 If it is necessary to install the network adapter again, perform the following procedure: 1. Switch OFF the computer. Be sure to observe the Translated Safety and Emission Information on page 75. 2. Remove the computer cover. Refer…

18, Installing the Network Adapter Card 18 Reviewing Safety Precautions Please review the following safety precautions before you install the network adapter card. Warning This is a “Class 1 LED product”. " 6 Warning Do not stare into the laser beam. (AT-2450FT, AT-2450FL, …

71, Network Adapter Card Installation Guide - Book II 71 Installing a BootROM Note There are two different variations of AT-2450FTX, AT-2700FTX and AT-2745FX Series cards. One with a BootROM switch and one without. If using the version with a switch see Step 3. Also, if using an AT-2700TX…

46, Microsoft Windows for Workgroups 46 c:\ net\lsl c:\net\a2500 (atnic,a2400) c:\net\ipxodi c:\net\netx 14. Exit Windows and re-boot your PC by powering OFF then ON. NetWare IPXODI Support For NetWare 4.x 1. Verify that the ODI drivers for the AT-2500/AT-2501 Ethernet Adapter Card are NOT lo…

15, Network Adapter Card Installation Guide - Book II 15 For Sales or Corporate Information You can contact Allied Telesyn for sales or corporate information at the location listed below: Allied Telesyn, Inc. 19800 North Creek Parkway, Suite 200 Bothell, WA 98011 Tel: 1 (425) 487-8880 Fax:…