Airlink101 EDGE/GPRS Operation & User’s Manual

31, PinPoint-E EDGE/GPRS - User Guide, version 2.32 25 Data Communication and Host Modes FIGURE 5. Wireless Ace: PPP/Ethernet Using a private IP insulates the PPP client from changes in IP addresses of the underlying net- work. The will perform basic NAT-like address translation on al…

125, PinPoint-E EDGE/GPRS - User Guide, version 2.32 119 PPPoE: Point to Point Protocol over Ethernet PPPoE connections can use a Service Name to differentiate PPPoE devices. You can use Wireless Ace to give your PinPoint-E a name. a. In Wireless Ace, select Dynamic IP from the groups on the le…

44, Airlink101 EDGE/GPRS PinPoint-E EDGE/GPRS - User Guide, version 2.32 38 Global Positioning System (GPS) Datum In addition to different reporting protocols, the PinPoint-E supports the most widely used GPS datum. The GPS datum is the method of ascertaining the position of the GPS device using a spe- cific reference po…

53, PinPoint-E EDGE/GPRS - User Guide, version 2.32 47 Global Positioning System (GPS) Store and Forward Reliable Mode The Store and Forward Reliable Mode allows the PinPoint-E to ensure all messages are received by the server even if the connection between them goes down for a period of time (such whe…

78, PinPoint-E EDGE/GPRS - User Guide, version 2.32 72 AT Commands: Information and Status *HOSTMODE? *NETOP? *NETPHONE? *NETRSSI? *NETSERV? *NETSTATE? The current host mode (AT, PPP, UDP, etc.). If the PinPoint-E is not in AT mode, telnet into the modem to execute this command. *N…

84, PinPoint-E EDGE/GPRS - User Guide, version 2.32 78 AT Commands: Misc (Miscellaneous) *NETUID=uid *STATICIP=d.d.d.d The login that is used to login to Your Wireless Service Provider’s cellular network, when required. uid=user id (up to 64 bytes) Set the static IP required to be received from the…