CASMED fore-sight elite Operation & User’s Manual

87, aPPendix a Menu Reference This appendix describes each of the Oximeter menus and provides a reference to the relevant section where applicable. Main/Home Menu Table 14: Main Menu Options Button Description See Patient Lets you start a new case, congure Sensor location and high/…

13, PreFaCe Preface Purpose This User Manual describes the features and operation of the FORE-SIGHT ELITE Absolute Tissue Oximeter. It is an integral part of the product and contains the instructions necessary to operate the Oximeter safely and in accordance with its functions and intended …

34, CASMED fore-sight elite Interfacing with Other Equipment The following sections describe the Oximeter interfaces that may be used. Note that the RJ-45 Ethernet port ( ) on the rear of the Oximeter is for CASMED personnel only. Connecting a Second Monitor The Oximeter display can be mirrored onto a second …

46, Connecting Sensors to the Preamp Cables 1. Be sure that all necessary Preamp cables are fully connected and that Sensors are placed correctly on the patient’s skin. 2. Use the clips on the Preamp cable to secure it to prevent the cable or Preamp from being pulled away from the patie…

28, Powering the Oximeter The Oximeter is designed for continuous operation. It is powered via an AC power cord that also recharges the Oximeter’s backup battery, which allows it to operate up to a half hour (on a new, fully charged battery) without an external power source. Installing the Batte…

72, Setting the Time and Date The Oximeter displays the Time and Date at the top of the display at all times, and the Trace View’s time markers change to maintain a consistent time reference at the selected scale. The Time and Date settings are also used to name patient data les and in recor…