Consew 206RB-5 Operating Instructions Manual

2, Consew 206RB-5 OPERATING INSTRUCTIONS CONSEW Model 206RB-5 This is a guide to use of CONSEW model 206RB-5,high-speed single needle compound walking-foot needle feed machine, under the best condition. Please read this guide thoroughly so that you may except good performance. NEEDLE NEEDLE BAR STR…

22, SUPPLEMENTARY INFORMATION ON OILING FOR MODEL 206RB-1 For simplified lubrication the upper arm of the machine is fitted with a centraliz ed lubricating system . Same is located beneath the ann top cover plate . Swing open this plate (Fig.l) and a felt-filled reservoir "R" will become vis…

7, NEEDLE CFig.7) CONSEW 206RB is set up to use standard style DPxl7. The size of the needle to be used should be detennined by the size of the thread, which must pass freely through the eye of the needle. HOW TO ATTACH THE NEEDLE 1 .Turn the machine pulleyover toward you until the needle bar0 moves u…

20, ADJUSTING THE THREAD CONTROLLER SPRING Normally, the thread controller spring ( 0, Fig. 24) should hold slack of the upper thread until the needle reaches to the goods, and it should pause while raising of the needle and passing of the upper thread through the bobbin case. I) For more co…

11, REGULATING THE THREAD TENSIONS For ordinary stitching, the tension of the upper and the lower threads should be equal so as to lock both threads in the center of the material. If the tension on either thread is stronger than on the other, imperfectstitching will be the result. If the tension…

23, CONSOLIDATED SEWNG MACHINE CORP. 131 WEST 25TH ST1IEr,NEWrOilK,NY 10a01,U.S.«. From the library of: Superior Sewing Machine & Supply LLC …