Airlink101 AR410W Operation & User’s Manual

31, Airlink101 AR410W 31 New: Click New to clear the text boxes and add required information to create a new entry. 4.4.2 Dynamic This screen enables you to set NAT parameters. NAT: Click the radio buttons to enable or disable NAT. Transmit: Click the radio buttons to set the desired trans…

26, 26 4.3 Status This selection enables you to view the status of the router’s LAN and WAN connections, and view logs and statistics pertaining to connections and packet transfers. 4.3.1 Device Information This screen enables you to view the router’s LAN, Wireless, and WAN configuration. …

36, 36 4.5.4 Domain Blocking This page allows you to either permit or deny users from accessing certain domains specified in the list. Domain Blocking: choose from Disabled, Allow users to access all domains except “Blocked Domains”, or Deny users to access all domains except “Permitt…

37, 37 4.5.5 Protocol Filter This screen enables you to allow and deny access based upon a communications protocol list you create. The protocol filter profiles are listed in the table at the bottom of the page. Note: When selecting items in the table at the bottom, click an…

42, 42 Add: Click to add the rule profile to the table at the bottom of the screen. Update: Click to update information for the rule if you have selected a list item and have made changes. Delete: Select a list item and click Delete to remove the item from the list. New: Click New to erase a…

33, 33 4.5 Access This page enables you to define access restrictions, set up protocol and IP filters, create virtual servers, define access for special applications such as games, and set firewall rules. 4.5.1 MAC Filters Enables you to allow or deny Internet access to users within the …