AJA io hd Installation And Operation Manual

33, 1 1 Chapter 4: Installation & Configuration 4 Installation Overview The installation and set up of an Io HD is very simple. Plug it in to AC mains power and connect the FireWire 800 cable to a suitable Mac Pro, MacBook Pro or Xserve’s FireWire 800 port with the cable supplied. All of t…

43, 1 33 Io HD Installation and Operation Manual — Genlock and Your System 2. Connect a Video Monitor to the Io HD Composite Analog Video Out BNC connector, or instead connect a monitor via the S-Video Out connector (4-pin mini-DIN). 3. Connect a 9-pin DB9 machine control cable betw…

19, 1 11 Io HD Installation and Operation Manual — Front Panel Although the default is to show Primary and Secondary formats, you can instead configure the Io HD to show the Primary format on the top line of the display and the currently configured timecode on the second line. If in an inp…

52, 42 Hold Last Application: this selection directs Io HD to hold and output the last frame of video from the last application to control Io HD. This can be helpful when operating in an environment where you're switching back and forth between multiple application windows. Tip: pressing an…

78, AJA io hd 68 Audio/Video Settings, Creating a New Easy Setup At any point in the above procedure you can go to the other tabbed windows and make additional changes. For example, in the Sequence Presets, Capture Presets, and Device Control Presets windows you can select a preset and click on an Edit butt…

38, 28 Select a Destination Drive For the Io HD Software 12. At the next screen, click the Install button to place the software on the drive you previously selected. Easy Install, Installer Screen 13. A system prompt will pop up with a reminder that OS X must be restarted after instal…