Anaheim Automation BSCKB1-120081 Operation & User’s Manual

4, August 2013L011088 4 Motor Connection Refer to the hookup diagram for typical driver applications. When connecting a motor for the rst time, connect the hall sensor wires (5 of them) to the appropriate spot on the terminal block. DO NOT CONNECT THE PHASES YET. Turn on power and ro…

5, August 2013L011088 5 Speed Adjust Setting The maximum speed of the motor is set by adjusting R17. The minimum speed of the motor is set by adjusting R25. The speed potentiometer is used to adjust the motor speed between the set minimum and maximum speed. Motor Run/Brake The motor run/brake…

3, August 2013L011088 3 Specications Output Current Rating: Adjustable 2.0 - 8.0 amperes per phase maximum operating peak current (1.0 - 4.0 amperes per phase maximum operating continuous current) Power Requirements: 85VAC (min) - 135VAC (max) Operating Temperature: Driver Heat…

8, Anaheim Automation BSCKB1-120081 August 2013L011088 8 Dimensions COPYRIGHT Copyright 2013 by Anaheim Automation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, ma…

6, August 2013L011088 6 Quick Disconnect/Potentiometer Location POT# Description R11 CLADJ R14 RAMP R17 Max Speed R23 Current Limit R25 Min Speed Hook-Up Diagram …