Anolis arcpower smartwhite 72 Operation & User’s Manual

7, 7 Maximum possible number of LED modules connected to the one zone of the ArcPower SmartWhite 72: Model total LEDs Warm White LEDs Cool White LEDs Max.number of connected modules ArcLine SmartWhite Optic 12 12 6 6 3 ArcLine SmartWhite Optic 24 24 12 12 1 ArcLine SmartWhite Optic 36 36 18 18 …

17, 17 9.Control of the ArcPower SmartWhite 72 via RS-232 9.1Wiring an RS-232 serial port 9-pin D connector (male) Front view of the socket: RS-232 cable: 9-pin D connector- female 9-pin D connector - female ArcPower …

10, 10 A description of each byte in DyNet protocol is the following: Byte 0: 1C - hexadecimal Logical Message (xed value) Byte 1: 01 - Area Byte 2: 00 – Channel level Byte 3: 80 - Channel Byte 4: ff – Channel Offset Byte 5: 00 – Fade Rate Byte 6: FF (�…

19, 19 10.Technical Specications Power supply: Input Voltage: 100-240 V AC, 50/60 Hz Fuse:T 2 A Max.Pover Consumption:120VA Input: Control:DMX 512 or DyNet protocol DMX connection:RJ45 RS 232 connection:9-pin D connector Output: Max.Output Voltage:48V DC Max.Output current:350mA pe…

5, 5 installed following the manufacturer´s instructions.The earth has to be connected! Cord plug connections: Cable Pin International Brown Live L Light blue Neutral N Yellow/Green Earth This device falls under protection class I.Therefor…

8, Anolis arcpower smartwhite 72 8 5.2.Master-slave operating 1.Unplug from the mains before installation. 2.Connect the LED modules to the xtures. 3.Connect the DMX output of the master xture in the data-chain with the DMX input of the rst slave. Always connect output with the input of the next slave until all slaves a…