Bolide Technology BE-KB03/E Operation Manual

6, ID-Code in Figure 2. DIP1-DIP4 are used to select type of the communication protocol as per following table Setting of Protocol Type Setting of default Baud Rate State of ID-CODE Type of Protocol DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 A01 OFF OFF OFF OFF ON OFF NEON …

1, BE-KB03/E Speed Dome Controller Operation Manual Please read this operation manual before using this device and use the device properly. Also, please keep this manual with care to ensure easy access at any time. …

10, protocols, operations could be something difference and those different parts will be listed on “Supplementary Description of the Keyboard Controller” in details.  The keyboard takes 12V DC power supply. Please confirm the voltage and polarity before the power ard under the rain or…

5, MENU Figure 1 z CAM：Select address of the intelligent Speed Dome . z MENU：Auxiliary control buttons. z AUTO：To control auto-horizontal rotation for pan/tilt. z CLEAR： To clear inputted data z 0-9： Number key z WIDE�…

4, I. Summary The keyboard controller is used for terminal receivers such as the intelligent Speed Dome and the decoder etc. Taking the EIA/RS-485 electrical interface between the keyboard and the receiver, one keyboard can control as mu…

3, Bolide Technology BE-KB03/E INDEX I. Summary……………………………………………………………………………3 II. Introduction of Function…………………………………………………………...3 III. Introduction of the Keyboard’s…