BOMBARDIER outlander max series Operator's Manual

134, 132 Pull the position lamp socket out of headlamp housing. 1. Position lamp socket 2. Headlamp housing Push bulb in and hold while turning counter- clockwise to release. Install the new bulb by first pushing in while turning clockwise. Put back the position lamp socket in the head- lamp hou…

122, 120 $ To be performed by an authorized Bombardier ATV dealer. The initial maintenance is very important and must not be neglected. % Pre-ride inspection item. & Every 100 hours, check coolant strength. ' More often under severe use such dusty area, sand, snow, wet or muddy co…

100, 98 Passenger’s Seat Removal – Push the passenger’s seat latch forward. This latch is located underneath the rear end of seat. 1. Seat latch – Gently lift the rear of the seat. – Pull seat rearwards. – Continue lifting movement until you can release the front retaining de…

89, 87 4) Brake Lever Lock Located on left side of handlebar on the brake lever. When applied, it prevents the vehicle from moving. Useful when the brake needs to be locked for example when doing a K-turn, during transportation or when the vehicle is not in operation. To engage mechanism: Sq…

123, 121 MAINTENANCE While reading this Operator’s Guide, remember that: The following covers the maintenance items that can be performed by the customer if de- sired. Other items found in maintenance chart must be performed by an authorized Bombardier ATV dealer. NOTE: Among other things, this se…

51, BOMBARDIER outlander max series 49 Riding Techniques Riding your vehicle too fast for the conditions may result in injury. Apply only enough throttle to proceed safely. Statistics show that high speed turns usually result in mishaps and injury. Always remember that this vehicle is heavy! Its pure weight alone may entrap you shoul…