CiA TVCD 506 Installation And Operation Manual

18, 14 Fi gur e 21 Fi gur e 22 Mar k C 4. To Ensure a Smooth and Successful Installation, You Should: 1) Have electrical work to comply with latest national electrical code, national fire code, and all applicable local codes and ordinances. 2) Coordinate with other trades to…

8, 4 the front part means optical multiplication while the rear part means digital multiplication. e. Description of Electronic Shutter: it is fixed on 1/50 sec after initialization when the camera is switched on, and the digital 50 appears on the screen. f. Setup of Imag…

15, CiA TVCD 506 11 2. Steps of Installation (taking wall-installing style as example) 1) Unpacking the carton and carefully take out the dome camera and its attachments. 2) Take out the cover of the wall-installed bracket (see Figure 7). 3) Take out system control wires from the bracket (…

19, 15 Iris Auto / Manual Parameter Focus Auto / Manual Pan Speed 0～300°/s Tilt Speed 0～60°/s Preset 128 presets (max) Auto Cruise At best 6 cruises Dome Function Tour 40 sec. VII. Troubleshooting Problems Possible Causes Remedies Power supply fault Repl…

5, 1 I. IMPORTANT SAFEGUARDS 1. All the safety and operating instructions should be read before the units is operated. 2. This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply you plan to us…

13, 9 PELCO-D ON ON OFF OFF OFF OFF ● PELCO-P/4800 ON OFF PELCO-P/9600 OFF OFF ON OFF OFF ON ● PANASONIC ON OFF ON OFF OFF ON ● Longcomity OFF ON ON OFF OFF ON ● HUNDA600 ON ON ON OFF OFF ON ● LILIN OFF OFF OFF ON ON OFF ● VICON ON OFF OFF ON ON OFF ● MOLYNX OFF…