Conbrov T-11 Operation & User’s Manual

10, Conbrov T-11 How to insert and take out Micro-SD card Installing the Micro-SD card: Please insert the Micro-SD card correctly into the Camera card slot. The Micro-SD card must be in the slot to record video and audio. Removing the Micro-SD card: Please use your fingernail to push the card slightl…

4, Note: If there is anything missing, please contact us immediately at [email protected]. Not included are a power adapter, a Micro-SD card and a card reader. The power adapter, Micro-SD card and reader are needed for charging the Camera and for recording and viewing videos. Product Access…

12, It may be necessary to change the Camera's preset time and date setting to reflect your local time. To change the time and date: Step 1: Power on the Camera, and connect it with a PC using the USB cable in the package. after about 12 seconds, the disc icon will open on your computer. T…

6, Detection Ability Important Notices: - When using the Camera, it should be placed in a perpendicular direction relative to the people passing by. - Avoid using the Camera in extreme temperatures that may reduce the motion-detection accuracy. - Once the fully charged Camera is switched…

9, Charging Information 9 3. Connect with your PC as a U-disk Please turn on the Camera first, then connect the Camera to your computer via the USB cable. The yellow and blue LED indicators will stay on, the red LED indicator will flash. …