brondell Coral UC300 Owner's Manual

13, 11 3. Attach the Escutcheon to the Main Body by inserting the blue tubing through it and pushing it all the way up until connected to the Main Body. 4. Install the faucet on top of the countertop or sink and feed the blue tubing through the hole to the cabinet below. Then slide the large Plas…

3, 1 CONTENTS Read this Owner’s Manual for correct installation, use and maintenance of this product. After reading and completing installation, keep this manual in a place that is easily accessible. PRODUCT INSTALLATION 09 T-VALVE INSTALLATION 10 FAUCET INSTALLATION 12 FILTER HEAD …

79, 77 PRODUITS CHIMIQUES ORGANIQUES VOLATILS (COV) COMPRIS PAR DES TESTS DE SUBSTITUTION Produit chimique Concentration de test à l’entrée 2 (mg/L unless specified) Concentration maximale dans l’eau à la sortie de l’appareil (mg/L unless specified) Pourcentage de réduction (%)…

19, 17 MAINTENANCE REPLACING THE FILTERS 1. Close the T-Valve under the sink to shut off the flow of water to the Coral. 2. Once the T-valve is shut off, turn the Indicator Faucet on all the way and keep it on until all the residual water in the tubes has been expelled. 4. Install …

26, brondell Coral UC300 24 Brondell products are backed by some of the most comprehensive warranties in the industry. Brondell warrants that the H2O+ water filtration system shall be free from defects in material and workmanship under normal use and service. Brondell H2O+ Coral Water Filtration System…

15, 13 STEP 4: INSTALLING THE FILTERS 1. To insert the filters, first line up the arrow on the filter head with the arrow on the filter NOTE: For purchasers of the Coral UC300, it is very important to install the filters in the correct order. Simply match the same label colors to the…