ARRI ALEXA Mini Manual 

62, 62 Assembly and retrofits 1 2 1. Properly align the two guiding pins (1) for correct lens mount fit (2). Note: Never apply force, align the guiding pins instead. 1 1 2. Crosswise, hand-tighten all four screws (1). 3. Only then, tighten all screws crosswise with the Allen key. N…

28, 28 Lens mount/filters 8 Lens mount/filters 1 1 Lens mount (here: titanium PL) Cooke /i support The camera supports the Cooke /i protocol for lenses running FW versions according to the following table. Lens type FW version S4 /i Prime lens (10-bit) 0.29 or higher S4 /i Prime lens (12 …

31, Lens mount/filters 31 1 2 Pressing the wheel (1) changes the step size between full and sub-stops (2). Note: Sub-stop precision depends on the lens type and is automatically set by the camera. 1 2 On the live screen, you can activate and deactivate iris adjustment (1) by short- pressing the l…

75, ARRI ALEXA Mini Technical Data are subject to change without notice.CAMERA DIMENSIONS – Version 2015-08 ALEXA Mini ALEXA Mini Length Width Height Weight ALEXA Mini (camera body with titanium PL lens mount) 184.75 mm - 7.27” 124.83 mm - 4.91” 140 mm - 5.5” ~ 2.3 kg/5 lbs Camera Right Ima…

7, For your safety / 为了您的安全 7 CAUTION! Condensation! Risk of electric shock and fire! Condensation may form on the sensor and electrical connections when exposing the camera to sudden changes of temperature or humidity! To avoid injury and damage, never operate the camera wh…

61, Assembly and retrofits 61 Deinstallation (here: a PL mount) 2 2 3 1 1. Perform task with care to protect optical surfaces. 2. Crosswise, loosen all four screws (2) with an Allen key. 3. Carefully remove the mount (1). 4. Store the mount in a case for dust protection. Note: To protect the s…