ARRI SkyPanel S30 Operation & User’s Manual

33, ARRI SkyPanel S30 Fixture Menu 33 Master/Slave Mode In Master/Slave mode the slave fixtures mimic the master fix- ture without delay. The master fixture generates a DMX signal on the 5-pin DMX Thru connector. Connect a maximum of 32 SkyPanels and L-series fixtures to a DMX data link. Choose one S…

14, Safety Information 14 CAUTION: High voltage! Danger of life! Always dis- connect the product complete from mains voltage before you connect or disconnect a cable. Always keep cables away from the product during operation. Do not tilt the power cable directly after the connector.…

13, Safety Information 13 Specific Safety Information Not to observe the safety information or general rules of reason may cause injury or death to yourself and others or damage to equipment. Intensive use can cause the surface to become warm. Let the product cool down complete before you …

41, DMX 41 DMX To control the SkyPanel via DMX you need a DMX data link. The SkyPanel has 5-pin locking XLR sockets for DMX / RDM data input and output. The default pin-out of both sockets is: Pin 1 = Shield Pin 2 = DMX Data - (cold) Pin 3 = DMX Data + (hot) Pin 4 = DMX Data - (cold) Pin 5 = …

40, Art-Net 40 Art-Net From firmware version 2.0 the SkyPanel supports Art-Net. Art- Net is a network protocol for controlling devices. Art-Net supports all modes of the SkyPanel. Here is a brief explanation of some basic terms being used by Art-Net. For more detailed information, please visit the we…

52, ARRI Lighting Service Manager 52 ARRI Lighting Service Manager Please find information about the features and the functionality of the ARRI Lighting Service Manager in the user manual for the ARRI Lighting Service Manager, which can be downloaded with the ARRI Lighting Service Manager software-bund…