Creme Caferacer Manual And Warranty

9, 9 BICYCLE MANUAL&WARRANTY FIG 3: Adjusting handlebar angle FIG 4: Adjusting stem height 6.4 Tightening torque for various bolts on the bicycle. Stem steer tube bolt – 16 Nm Stem handlebar bolts – 14 Nm Front hub axle bolt– 17 Nm (for 10mm axle hubs) Rear wheel bolt– 29 Nm…

17, 17 BICYCLE MANUAL&WARRANTY 11. This warranty is void if: - the warranty card is lled in incorrectly or incompletely, - any modications have been made to the bicycle by the customer, - damage has been caused by external parts that have been incorrectly as- sembled on the bicycl…

14, 14 BICYCLE MANUAL&WARRANTY 9.5 STEP 5: Dismount the front caliper brake from the fork crown, slide the fender mount off the bolt, then slide the safety strip onto the caliper bolt, like on the attached photo. 9.6 STEP 6: Wrap the strip around the rack, and return to the cali…

12, 12 BICYCLE MANUAL&WARRANTY 9. FRONT RACK MOUNTING PROCEDURE. 9.1 STEP 1: Identify all the components of the front rack. 1/ left stay, 2/ right stay, 3/ main tray, 4/ lamp, 5/ nuts, 6/ front bolts 7/ safety strip 9.2 STEP 2: Remove the 4 bolts that come threaded into the side of the front fork…

6, 6 BICYCLE MANUAL&WARRANTY between your legs try turning the handlebars left and right - the relative posi- tion of the stem, handlebar and fork should stay the same. If any movement is noticed, tighten the steer tube bolt (FIG 2) using 16 Nm of torque. Never ride a bicycle wi…