Dalsa P4-CC-08K050-00-R Operation & User’s Manual

57, Piranha4 8K Color Camera User's Manual 57 Teledyne DALSA 03-032-20156-00 FileAccessControl “File Access Control” Group All features from the GenICam™ Standard Features Naming Convention have been implemented. Name FileSelector Display Name "File Sele…

8, 8 Piranha4 8K Camera Color User's Manual 03-032-20156-00 Teledyne DALSA Compliance Regulatory Compliance CE and RoHS; GenICam *At the time of this release, CamExpert does not accommodate color Deca 9.1 mode. Contact Customer Support if you are interested in evaluati…

21, Piranha4 8K Color Camera User's Manual 21 Teledyne DALSA 03-032-20156-00 RGBG 8 bit CL Deca, max line rate 51 kHz without AOI and 85 MHz CL clock Note: only 8190 pixels transmitted, no color interpolation This timing can be used for applications that require line rates up to 51 k…

37, Piranha4 8K Color Camera User's Manual 37 Teledyne DALSA 03-032-20156-00 GenICam parameters to set: I / O Controls > Trigger Mode > On Sensor Control > Exposure Mode > Trigger Width Warning! When running external line rate and external exposure time, the line…

38, Dalsa P4-CC-08K050-00-R 38 Piranha4 8K Camera Color User's Manual 03-032-20156-00 Teledyne DALSA Figure 17. Exposure Modes 1. External Trigger Off, Internal Exposure Control Free running, not synchronized to any external signal Programmable Exposure Time 1 Readout 2 Programmable Line Time …

63, Piranha4 8K Color Camera User's Manual 63 Teledyne DALSA 03-032-20156-00 Rules The interface is not case sensitive One command and argument(s) per line To enter a floating point number prefix it with a ―F‖ – for example ―ssg 0 f1.5‖ Error cod…