Digiop D3D-2500 Operation & User’s Manual

61, Digiop D3D-2500 53DIGIOP® 3D Camera User Manual SECTION 5: CONFIGURE COUNTING LINES Counting tab with pop-up menu 3. Select Filter. An orange lter zone appears in the image space. 4. Place your mouse cursor in the middle of the orange lter zone and click and drag to move it to the general area wher…

56, 48 www.digiop.com SECTION 5: CONFIGURE COUNTING LINES Button Bar The enter line should be drawn with the directional circle in the direction of the trac ow that you want to count. You can rotate the Enter and Exit lines in any direction to count trac ows in various environments. …

98, 90 www.digiop.com SECTION 7: CONFIGURING SERVICE APPLICATIONS 5. Double-click the Name eld for the new zone. 6. Use the mouse to select the default zone name that was populated when you created the new zone. 7. Enter the new name for the Zone (Cashier01, Teller01, Checkout1, etc.…

60, 52 www.digiop.com SECTION 5: CONFIGURE COUNTING LINES One Enter Count recorded because the track started in the lter zone and crossed the Enter line. One Exit Count recorded because the track ended in the lter zone after crossing the exit line. 5.11.2 Using Filter Zones in cameras mount…

2, ii www.digiop.com Revision History Date Reason for Change 3/8/12 Initial release. CAUTION  EQUIPMENT MODIFICATION Equipment changes or modications not expressly approved by DIGIOP® could void the user’s authority to operate the equipment and could create a hazardous conditio…