Gigaset Pro series Hybird 120 Manual 

222, Field Description Outbound Interface Shows the interface for which the QoS queues are being con- figured. Prioritisation queue Select the queue priority type. Possible values: • !! (!" (default value): Queue for data classified as “normal”. • % 6�…

409, Index Description 58 ISDN Timeserver 14 System Admin Password 10 Gigaset DECT 119 # #1 #2, #3 47 A Access 333 Access Configuration 61 Access Filter 218 Access Level 40 Access Type 54 , 76 Access Filter 214 Access Profiles 38 Access Codes 19 Access Rules 213 ACCESS_ACCEPT 30 ACCESS_…

55, Field Description The function is enabled with ). The function is disabled by default. Certificate Revocation List (CRL) Checking Only for Certificate is CA Certificate = ) Define the extent to which certificate revocation lists (CRLs) are to be included in the v…

415, Gigaset Pro series Hybird 120 Internet + Dialup 230 Internet Key Exchange 253 Interval 336 , 340 , 351 , 354 Invalid DNS Packets 322 IP Compression 275 IP Accounting 381 IP Configuration 179 IP Address 320 , 332 , 380 , 387 , 395 IP Address Assignment 255 IP Address Mode 234 , 238 , 242 , 287 , 293 IP Address R…

177, button. These phones then ring if the ring button is pressed. On analogue telephones, the signal on the telephone matches the intercom call. In place of the internal telephones, an external telephone can also be configured as the call destination for the ring button. Your door intercom can …

138, Field Description ance feature is enabled for as system without subsystem, two simultaneous calls on the phone are not connected to each other after the receiver is replaced but released, for example. Here, the performance feature should not be set. The function is activated by selec…